Vetus ASD38H Anti-Siphon Air Vent With Hose and Fittings (38mm)
Part No: V-ASD38H
If the point where the cooling water is injected into the exhaust is less than 15cm above the waterline, then when the engine is stopped, there is a risk that cooling water will siphon into the exhaust... Read more
If the point where the cooling water is injected into the exhaust is less than 15cm above the waterline, then when the engine is stopped, there is a risk that cooling water will siphon into the exhaust system, and subsequently into the engine itself. Such siphoning may be prevented by fitting the V-ASD38H at least 40cm above the waterline.
The V-ASD38H is ideal for toilets or holding tanks which are installed below the waterline. Comes complete with a skin fitting, hose clamps, and 4m of breather hose. Features a hose connection to the outside of the hull. There is a constant bleed off of cooling water through this hose, whilst the engine is running. Can be easily dismantled by hand for cleaning.
For 38mm ID hose.
| Height Description | 107mm |
| Length | Hose: 4 Metres x 8mm ID hose |
| Material | Polypropylene Plastic bend and plastic hull outlet material |
| Width | 129mm |
| Brand | Vetus |
| Hose Tail Size | 38mm / 1-1/2" |
| Primary Construction | Plastic |
| Valve Design | Siphon Break Valve |
| With Valve | No |
| Hose Size | Suits ID: 38mm (1-1/2") |
| Model | ASD38H |
| Depth | 48mm |
£98.98
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£98.98 Incl VAT
0 in stock
Get notified when it's back in stock
0 in stock
Please check with the store before travelling to avoid disappointment
