Jabsco Accumulator Tank CW288 (8 Litres)
Part No: JAB-CW288
Jabsco CW288 enamelled steel accumulator tank with stainless steel flange and internal rubber membrane. This 8 litre tank can be mounted in any orientation and is ideal for small to medium-sized pressure... Read more
Jabsco CW288 enamelled steel accumulator tank with stainless steel flange and internal rubber membrane. This 8 litre tank can be mounted in any orientation and is ideal for small to medium-sized pressure systems.
• Capacity: nominal 8 litres, working capacity up to approximately 4 litres
• Dimensions: 330mm(H) x 205mm(D)
• Connections Type: 3/4" BSP male thread
• Pressure: Max 4 bar (60 psi)
Optional bracket kit CW324 is available for mounting on any flat surface.
An accumulator tank is an important part of any pressurised water system that includes a pressure-controlled pump (some modern computer-controlled pumps may not require an accumulator tank). Fitted close to the discharge port of the pressurised water pump, the accumulator tank acts as a pressure buffer, ensuring a smooth flow of water from the outlets. Without an accumulator tank, the pump is liable to switch itself rapidly on and off whenever its flow rate exceeds demand from the outlets. Constant on-off cycling leads to increased pump wear and unnecessary battery drain. The accumulator tank stops this rapid cycling, resulting in smooth water flow (important in showers) and an extended pump life.
| Capacity Description | 8 Litres (2.1 US Gallons) |
| Height Description | 330mm |
| Working Pressure | 4 bar (60psi) |
| Brand | Jabsco |
| Country of Origin | Italy |
| Connections Description | 3/4" BSP Male |
| Diameter Description | 205mm |
£74.03
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£74.03 Incl VAT
0 in stock
Please check with the store before travelling to avoid disappointment
