Johnson Neoprene Pump Impeller for Johnson F9 Pump Models (12 Blade)
Part No: 09-814B
The genuine Johnson neoprene flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump... Read more
The genuine Johnson neoprene flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller is designed to be installed to some of the F9 range of Johnson Pumps which suits the impeller dimensions listed below, including:
- F9B-3600 pumps (10-13026-4), F9B-3607 pumps (10-13026-10), F9B-3620 pumps (10-13026-6), F9B-3627 pumps (10-13026-12), F9B-3630 pumps (10-13026-5), F9B-3637 pumps (10-13026-11)
- F9B-5 pumps (10-24161-1), F9B-5600 pumps (10-13027-63 & 10-13027-99), F9B-5600-TSS pumps (10-13178-99), F9B-5600-VF pumps (10-13226-99), F9B-5607 pumps (10-13027-98)
- F9B-9 pumps (10-13080-01, 10-13095-01, 10-13095-02, 10-24159-1, 10-24308-01 & 10-24430-01), F9B-902 pumps (10-24308-03), F9B-903 pumps (10-24006-2 & 10-24006-4), F9B-905 pumps (10-13087-01, 10-13166-01, 10-13171-01, 10-24006-1, 10-24006-3, 10-24159-2 & 10-24308-02)
- Volvo Penta 846105 & 3837935 pumps
- Scania 1785016, 1785018 & 1785244 pumps
- Orbitrade 17935 pumps
The Johnson flexible pump impeller has twelve blades and is supplied complete with lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump.
The Johnson 09-814B can be used to replace the Jabsco 21676-0001 Europe and 17936-0001 USA flexible impellers as well as Volvo Penta 875814 and Orbitrade 15814.
It is highly recommended to make sure you use an original pump impeller for your flexible impeller pump as this will ensure that the quality complies with the performance and dimension requirements for each pump type. Johnson Pump impellers are manufactured in strict compliance with the pump specifications set by the engine manufacturers.
The impeller is fitted as standard to the following engines:
- Mercedes OM424
- Mitsubishi S6M3
- Volvo Penta TAMD102A, TAMD102D, TAMD103A-A, TAMD120B, TAMD121C, TAMD121D, TAMD122A, TAMD122C, TAMD122D, TAMD122P-A, TAMD122P-C, TAMD162A, TAMD162B, TAMD162C, TAMD162C-B, TAMD162C-C, TAMD163A, TAMD163A-A, TAMD163P & TAMD163P-A
- Yanmar 6SY-STP & 8SY-STP from 1997
As well as: Alaska Diesel L6140A, M6140A, Detroit Diesel 671 TI, 871, 1271, Iveco-Aifo 8281 SRM44, MTU Series 183, Scania D11M01, D14, DN9, DN11, DS11, DS14, DSI11, DSI11M01 & DSI14.
| Application | Johnson F9 Pumps |
| Material | Neoprene |
| Brand | Johnson |
| Primary Construction | Neoprene |
| Suitable For | Mercedes|Mitsubishi|Volvo|Yanmar |
| Impeller Shaft Diameter | 25.4mm |
| Number of Impeller Blades | 12 |
| Diameter Description | 95mm, Shaft 25.4mm |
| Drive Type Description | Spline Drive |
| Model | 09-814B |
| Replaces | Jabsco 21676-0001 & 17936-0001, Orbitrade 15814, Volvo Penta 875814 |
| Depth | 88.5mm |
£151.69
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£151.69 Incl VAT
20 in stock
4 in stock
Please check with the store before travelling to avoid disappointment
