R&D Compression Flexible Engine Mount (160-370LBS / 5/8" Stud)
Part No: 207004
The compression flexible engine mounting is a low height mount with minimum deflection.Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more.Compression mountings... Read more
The compression flexible engine mounting is a low height mount with minimum deflection.
Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more.
Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of the height adjusting nut and the top washer of the mounting should not be more than 9mm (0.375").
If required, increase the height with a spacer under the mount. The first adjusting nut adds approximately 10mm.
The dimensions of the flexible engine mount are shown in the drawing located below the main image, click the image to and hold your mouse over the image view the full size drawing.
| Application | 2 & 3 Cylinder Long Stroke Engines, 4 Cylinder Engines, 6 Cylinder & Over Engines |
| Capacity Description | 160 - 370 lbs |
| Height Description | 116mm (4.57"), Base: 44.5mm (1.75") |
| Length | 130mm (5.13") |
| Maximum Load Description | 73kg to 168kg (160lbs to 370lbs) |
| Width | 76mm (3") |
| Brand | R&D Marine |
| Hole Centres | 101.6mm (4") |
| Suitable For | 2 & 3 Cylinder Long Stroke Engines|4 Cylinder Engines|6 Cylinder & Over Engines |
| Country of Origin | United Kingdom |
| Engine Mount | Compression Engine Mounts |
| Deflection | 2.3mm (0.09") |
| Dimensions | Height Adjusting Nut Thickness: 14mm (0.55") |
| Mount Pre loaded | 1.5mm (0.06") |
| Stud Size | 5/8" UNF |
£61.03
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£61.03 Incl VAT
19 in stock
12 in stock
Please check with the store before travelling to avoid disappointment
