Scanstrut SPH-15D-W ScanPod Helm Pod for Displays Up To 16" (Garmin)
Part No: 6-80642
Scanstrut SPH-15D-W ScanPod Helm Pod is designed for mounting your display right where you need it. The Helm Pod fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") in diameter. This allows you... Read more
Scanstrut SPH-15D-W ScanPod Helm Pod is designed for mounting your display right where you need it. The Helm Pod fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") in diameter. This allows you to have your display in the prime position while out sailing on your sailing boat.
Scanstrut Helm Pod SPH-15D-W fits the following devices:
Chartplotters & Fishfinders:
- B&G Zeus2 15, Zeus2 16, Zeus3 16 & Zeus3s 16
- Furuno FCV295, MFD12, MU-120C, MU-150HD, MU-155C, TZT L15F, TZT12F & TZT14
- Garmin GPSMap 5015, GPSMap 7015 / 7215, GPSMap 8015 / 8215, GPSMap 8416 / 8417, GPSMap 8616 / 8616xvs & GPSMap 8617 / 8617xvs
- Humminbird Apex 13, Apex 16 & Solix 15 Chirp Mega SI+ G3
- Lowrance HDS-16 Carbon
- Northstar 6100i - 15.1" & 8000i - 15"
- Raymarine Axiom 16 XL, C Series - C120, C Series - C140W, E Series - E120, E140W, E165, G120 & G150
- Simrad GB40 15" Monitor, NSS-16 & NSS-16 evo2
- Universal helm fixing: Fits pedestal rails 25mm - 33.7mm (0.98" - 1.33") OD.
- Secure & watertight install: Saddle system supports the stainless tubing enabling a secure & rigid fit onto any pedestal & also ensures a watertight seal at cable entry.
- No drill fixing kit: Customised U-bolts fit around the rail & through the saddles into the back of the pod eliminating the need for time consuming & awkward drilling of the stainless rail.
- Hassle-free install & service: Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick & safe installation & repeat servicing.
- Increased protection: Pod seal is made from a high tear strength silicone, it has a very high resistance to heat & UV so you can have confidence that it won’t deteriorate over time.
- Supplied uncut: As standard you will receive your scanpod uncut. For a small charge Scanstrut offer a factory cutting service.
| Cut Out | Maximum Display: 423mm x 333mm (16.7" x 13.1") |
| Height Description | 396mm (15.6") |
| Width | 482mm (19"), Fits distance between mounting rails: 177.8mm to 381mm (7" - 15") |
| Brand | Scanstrut |
| Diameter Description | For Pedestal Rail OD: 25mm to 33.7mm (0.98" - 1.33") |
| Dimensions | Maximum Usable Face: 424mm x 349mm (16.7" x 13.7") |
| Tilt | 7° |
| Depth | 175mm (6.9") |
£748.00
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£748.00 Incl VAT
0 in stock
Get notified when it's back in stock
0 in stock
Please check with the store before travelling to avoid disappointment
