Scanstrut SPH-4XI-W Helm Pod for 4 Instruments / 2 + 7" Display
Part No: 6-80645
Scanstrut SPH-4XI-W ScanPod Helm Pod is designed for mounting up to 4 standard sized navigation instruments / autopilots or 2 instruments and a 7" display, right where you need them. The Helm Pod fits... Read more
Scanstrut SPH-4XI-W ScanPod Helm Pod is designed for mounting up to 4 standard sized navigation instruments / autopilots or 2 instruments and a 7" display, right where you need them. The Helm Pod fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") in diameter. This allows you to have your instruments in the prime position while out on your sailing boat.
Scanstrut Helm Pod SPH-4XI-W fits the following devices:
Instruments & Autopilots:
- B&G 10 / 10 HV, Triton & Triton²
- Furuno FI-50 STD Instruments, NAVpilot-300 & NAVpilot-711C
- Garmin GMI 10, GMI 20, GNX, GNX 20 & GNX 21
- Nexus NX, NX2 Digital & NX2 Analogue
- Northstar Explorer 310 Instruments
- Raymarine i70, p70, p70r, ST290 Analogue, ST60+, ST70 & T100 Series
- Simrad AP24, AP44, IS20, IS35 Digital Gauge, IS42 Digital Display, IS42J Digital Gauge, IS70 & IS80
- Tacktick Maxi Display T100 Series
- Universal helm fixing: Fits pedestal rails 25mm - 33.7mm (0.98" - 1.33") OD.
- Secure & watertight install: Saddle system supports the stainless tubing enabling a secure & rigid fit onto any pedestal & also ensures a watertight seal at cable entry.
- No drill fixing kit: Customised U-bolts fit around the rail & through the saddles into the back of the pod eliminating the need for time consuming & awkward drilling of the stainless rail.
- Hassle-free install & service: Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick & safe installation & repeat servicing.
- Increased protection: Pod seal is made from a high tear strength silicone, it has a very high resistance to heat & UV so you can have confidence that it won’t deteriorate over time.
- Supplied uncut: As standard you will receive your scanpod uncut. For a small charge Scanstrut offer a factory cutting service.
| Cut Out | Maximum Instruments: 120mm x 102mm (4.7" x 4"), Maximum Display: 140.5mm x 230mm (5.5" x 9.1") |
| Width | Overall: 566mm (22.3"), Fits distance between mounting rails: 177.8mm to 304.8mm (7" - 12") |
| Brand | Scanstrut |
| Diameter Description | For Pedestal Rail OD: 25mm to 33.7mm (0.98" - 1.33") |
| Dimensions | Maximum Usable Face Instruments: 135mm x 122mm (5.3" x 4.8"), Display: 158mm x 250mm (6.2" x 9.8") |
| Tilt | 7° |
£589.00
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£589.00 Incl VAT
0 in stock
Please check with the store before travelling to avoid disappointment
