Sherwood 09959K Flexible 12 Vane Neoprene Impeller Kit (Through Key)
Part No: SW09959K
The Sherwood 09959K impeller is supplied with an O-ring, gaskets and technical guide. It has 12 vanes and a through key keyway. The neoprene impeller fits on a 5/8" pump shaft and is designed to pump... Read more
The Sherwood 09959K impeller is supplied with an O-ring, gaskets and technical guide. It has 12 vanes and a through key keyway. The neoprene impeller fits on a 5/8" pump shaft and is designed to pump water.
Sherwood marine raw water pumps feature a flexible neoprene impeller that attaches to the shaft. The shaft rotation powers the impeller which transfers water by creating a vacuum on the inlet side and then forcing water out on the outlet side. As such an important component, you should ensure that your pump impeller is always in top condition and that you always use the correct impeller for your application. This will help to ensure the best engine performance and prolong engine life.
Sherwood recommend that all impellers are replaced at least annually (depending on application) to maintain impeller performance, however it is good practice to inspect them often to check for excessive abrasions or damage. It is also recommended that during long periods of being unused, impellers should be removed from the pump to prevent UV deterioration, vanes setting into position and copper bonding of the impeller to the housing. Any impeller issues can lead to engine overheating, the main reason for premature engine wear.
The 09959K impeller fits the following pumps:
- Sherwood A03 pumps used in Chrysler Marine Slant 6 engines (Chrysler 2659553).
- Sherwood A16 pumps used in Chris Craft Model A engines.
- Sherwood B06 pumps used in Perkins 4-107 diesel engines.
- Sherwood D55 & P10550G pumps used in Chrysler Marine M383X, M413E, M440X engines (Chrysler 2847629 & E-7592-M).
- Sherwood D60, D65, N10390G & R10935G pumps used in Chrysler Marine M273X, LM318X engines (Chrysler 2847630, 2847631, E-7584-M & E-9327-M).
- Sherwood D75 & Q10855G pumps used in Chrysler Marine M225X engines (Chrysler 2847632 & E-8542-M).
- Sherwood F85 pumps used in Westerbeke Pilot 10-20 engines (Westerbeke 16423).
- Sherwood G15 and G30-2B pumps used in Chris Craft Model 350 engines (Chris Craft 16.80-18346).
- Sherwood G20 & G21-01 pumps used in Pleasurecraft Marine 302 & 351 engines.
- Sherwood G22-01 pumps used in Mitsubishi 4 cyl. engines.
- Sherwood G30-2 pumps used in Chris Craft Model 350 engines (Chris Craft 16.80-18346) and Volvo Penta engines.
- Sherwood G65 pumps used in Perkins 4-108 diesel engines (Perkins NA003335).
- Sherwood G95-1 pumps used in Glastron 121, 182 & 302 CI engines.
- Sherwood G9902 & G9903 pumps used in Volvo Penta & OMC 4 cyl. engines (3852399 & 3855079).
- Sherwood H10 pumps used in Crusader Chevy V6 engines (Crusader 97512).
- Sherwood H5 pumps used in Perkins 4-154 diesel engines (Perkins NA005576).
- Sherwood J70 pumps used in Commander 302 & 351 engines (Commander CM1-10-610).
- Sherwood J90 pumps used in Pathfinder 4 cyl. engines.
- Sherwood K75 & K75B pumps used in Onan 4 cyl. diesel engines (Onan 132-0275 & 132-0276).
- Sherwood M10065G & L9930G pumps used in Gray Marine 6 cyl. engines (Gray Marine G77475 & G77560).
- Sherwood M10210G, N10410G, P10700G, F15 pumps used in Crusader Interceptor engines.
- Sherwood M10263G pumps used in Chris Craft Model M engines (Chris Craft 16.80-10008).
- Sherwood M10264G pumps used in Chris Craft Model W engines (Chris Craft 16.80-10009).
- Sherwood M10270G, M10280G, Q10755G, Q10765G pumps used in Crusader Chevy RH Rotation engines.
- Sherwood N10460 pumps used in Gray Marine Compact V8 215, 225 CCW (Gray Marine G80301).
- Sherwood N10470 pumps used in Gray Marine Compact V8 215, 225 CW (Gray Marine G80300).
- Sherwood N10510G, P10650G, L9930G pumps used in Gray Marine 4 cyl. engines (Gray Marine G78478, G78972 & G77560).
- Sherwood P10560G pumps used in Chrysler Marine M80 (CW) engines (Chrysler E5913-M).
- Sherwood P10610G pumps used in Chrysler Marine Slant 6 engines (Chrysler E-7783-M).
- Sherwood P10710G pumps used in Chrysler Marine M80 (CCW) engines (Chrysler E5839-M).
- Sherwood Q10770G & R10955G pumps used in Gray Marine Gov engines (Gray Marine G76647 & G80971).
- Sherwood R10870G pumps used in Medalist Light Plants engines.
- Sherwood R10870G-01 pumps used in Westerbeke Gov Life Boat engines (Westerbeke 11353).
- Sherwood R10920G & L9920G pumps used in Gray Marine Fireball V8 (CCW Rotation) engines (Gray Marine G80784 & G77585).
- Sherwood R10925G & M10180G pumps used in Gray Marine Fireball V8 (CW Rotation) engines (Gray Marine G80785 & G77586).
- Sherwood R10930G pumps used in Medalist Sabre V6 engines.
- Sherwood R50G, G1 & G2 pumps.
- Sherwood R991 pumps used in Yamaha 4.3 V6, 305/350 Chevy engines (Yamaha 10100000).
- Sherwood RPGC pumps used in Onan 12MDJC-15 MDJF & 30MDEH-50MDEG engines (Onan 132C115).
- Sherwood G9901 pumps used in Volvo Penta & OMC 6-8 cyl. engines (3852398), including Volvo Penta: 4.3GIPHUSCE, 4.3GIPNCACE, 4.3GIPNCBCE, 4.3GIPNCMCE, 4.3GIPNCSCE, 4.3GLMMDA, 4.3GLPHUB, 4.3GLPMDA, 4.3GLPNCA, 4.3GLPNCB, 4.3GLPNCS, 4.3GSJNCC, 4.3GSJNCS, 4.3GSPHUB, 4.3GSPHUS, 4.3GSPMDA, 4.3GSPNCA, 4.3GSPNCB, 4.3GSPNCM, 4.3GSPNCS, 5.0FIPHUBCE, 5.0FIPHUCCE, 5.0FIPHUECE, 5.0FIPHURCE, 5.0FIPHUSCE, 5.0FiPMDA, 5.0FiPMDM, 5.0FIPNCACE, 5.0FIPNCBCE, 5.0FIPNCMCE, 5.0FIPNCSCE, 5.0FLPHUB, 5.0FLPHUC, 5.0FLPHUE, 5.0FLPHUR, 5.0FLPHUS, 5.0FLPMDA, 5.0FLPNCA, 5.0FLPNCB, 5.0FLPNCM, 5.0FLPNCS, 5.7GIIMDA, 5.7GIINCCCE, 5.7GiPHUS, 5.7GIPMDA, 5.7GIPMDACE, 5.7GIPNCACE, 5.7GIPNCBCE, 5.7GIPNCMCE, 5.7GIPNCSCE, 5.7GLIMDA, 5.7GLPMDA, 5.7GLPNCS, 5.8FIIHUBCE, 5.8FIIHUECE, 5.8FIPHUBCE, 5.8FIPHUCCE, 5.8FIPHUECE, 5.8FIPHURCE, 5.8FIPHUSCE, 5.8FiPMDA, 5.8FiPMDM, 5.8FIPNCACE, 5.8FIPNCBCE, 5.8FIPNCMCE, 5.8FIPNCSCE, 5.8FLIHUB, 5.8FLIHUE, 5.8FLINCC, 5.8FLINCS, 5.8FLPHUB, 5.8FLPHUC, 5.8FLPHUE, 5.8FLPHUR, 5.8FLPHUS, 5.8FLPMDA, 5.8FLPNCA, 5.8FLPNCB, 5.8FLPNCM, 5.8FLPNCS, 5.8FSIINCC, 5.8FSIINCS, 5.8FSIINCS, 5.8FSIPHUBCE, 5.8FSIPHUCCE, 5.8FSIPHUECE, 5.8FSIPHURCE, 5.8FSIPHUSCE, 5.8FSIPNCACE, 5.8FSIPNCD, 5.8FSIPNCS, 7.4GIIHUBCE, 7.4GIINCCCE, 7.4GIINCSCE, 7.4GIPHUSCE, 7.4GIPNCACE, 7.4GIPNCBCE, 7.4GIPNCMCE, 7.4GIPNCSCE, 7.4GLIHUB, 7.4GLIMDA, 7.4GLIMDM, 7.4GLINCC, 7.4GLINCS, 7.4GLPHUS, 7.4GLPMDA, 7.4GLPMDM, 7.4GLPNCA, 7.4GLPNCB, 7.4GLPNCM, 7.4GLPNCS, 7.4GSIINCC, 7.4GSIINCS, 7.4GSIXHUS, 7.4GSIXNCB, 7.4GSIXNCM, 8.2GLIMDA, 8.2GLIMDM, 8.2GLPMDA, 8.2GLPMDM & 8.2GSIXNCB.
| Application | See Description |
| Material | Neoprene |
| Brand | Sherwood |
| Primary Construction | Neoprene |
| Suitable For | Chris Craft|Chrysler|Johnson Evinrude|Mitsubishi|Onan|Perkins|Volvo|Westerbeke|Yamaha |
| Impeller Shaft Diameter | 15.9mm |
| Number of Impeller Blades | 12 |
| Contents | Sherwood: 09959 Impeller, 10103 Gasket, 10609 Gasket, 10612 Gasket, 11360 Gasket, 12231 O-Ring, 12855 Gasket & L-3051 Impeller Kit Tech. Guide |
| Diameter Description | 62.5mm (2-7/16"), Shaft 15.9mm (5/8") |
| Dimensions | Keyway: 4.8mm (3/16") Through Key |
| Drive Type Description | Key Drive |
| Model | 09959K |
| Replaces | Copy Impeller: 18838. Sherwood 12981 Minor Repair Kit (when bought with SW10514 shaft seal). |
| Depth | 32mm (1-1/4") |
£47.87
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£47.87 Incl VAT
9 in stock
9 in stock
Please check with the store before travelling to avoid disappointment
