Victron MultiPlus Inverter/Charger (24V / 800VA)
Part No: VC-PMP241800000
The Victron MultiPlus is a combined power inverter and battery charger in one unit. The PMP241800000 is suitable for charging 24 volt batteries from 187-265V AC input, as well as producing a true sine... Read more
The Victron MultiPlus is a combined power inverter and battery charger in one unit. The PMP241800000 is suitable for charging 24 volt batteries from 187-265V AC input, as well as producing a true sine wave 230V AC output from these 24 volt batteries.
When connected to shore power or a generator, the MultiPlus will draw a large current and use it to power any AC loads connected to the output side. Any leftover power will then be used for charging batteries, while protecting the supply side from overloading. If there are periods where AC load exceeds the input power, either by adding more appliances or by the input power being disconnected, the multi will switch to battery power within 20 milliseconds, so fast that electronic equipment will continue to operate without any disruption.
If more power is required, up to 6 Victron MultiPlus units can be used in parallel operation. Each unit also features protections against problems such as short circuits, over / under voltage, high temperatures etc to prevent failure. Monitoring and controlling your Victron MultiPlus is easy too, through the Color Control GX, the Venus GX or any smartphone/tablet or computer with internet connection.
Inverter
Input Voltage Range: 19V - 33V
Output: Output voltage: 230VAC ± 2% Frequency: 50Hz ± 0.1%
Cont. output power at 25°C: 800VA
Cont. output power at 25°C: 700W
Cont. output power at 40°C: 650W
Cont. output power at 65°C: 400W
Peak power: 1600W
Maximum efficiency: 93%
Zero-load power: 7W
Zero-load power in search mode: 2W
Charger
AC Input: Input voltage range: 187-265 VAC Input frequency: 45 - 65 Hz
Charge voltage absorption: 28.8V3
Charge voltage float: 27.6V
Storage mode: 26.4V
Charge current house battery: 16A
Charge current starter battery: 1A
Battery temperature sensor: Yes
| Approvals | EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1, EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3, ECE R10-4 |
| Height Description | 360mm (14.2") |
| Material | Steel/ABS (blue RAL 5012) |
| Operating Temperature | -40°C to +65°C |
| Rating | IP21 |
| Voltage Description | Charger Input: 187-265V AC, Inverter Input: 19-33V DC, Inverter Output: 230V AC ±2% |
| Wattage | Output: 700W @ 25°C, 650W @ 40°C, 400W @ 65°C |
| Width | 240mm |
| Brand | Victron |
| Style | Combined Inverters & Battery Chargers |
| Charger Short Circuit Protection | Yes |
| Frequency Description | Charger Input: 45-65Hz, Inverter Output: 50Hz ± 1% |
| Amps Description | Transfer Switch: 16A |
| Depth | 100mm |
£482.46
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£482.46 Incl VAT
4 in stock
2 in stock
Please check with the store before travelling to avoid disappointment
